Build your door
Choose your door style
Start with a flat panel or a shaker door, then choose your finish and sizes below.
Material & finish
22 mm Finsa Hidrofugo MR MDF
Finsa Fibrapan Hidrofugo is a moisture-resistant medium-density fibreboard with a smooth surface suited to machining and painted finishes. Used for interior furniture, including kitchens, wardrobes and bathroom cabinetry.
- Manufacturer / product
- Finsa · Fibrapan Hidrofugo MR MDF
- Door thickness
- 22 mm
- Board grade
- MDF.H — general use in humid conditions, EN 622-5
- Construction
- One solid piece of MDF, CNC machined; no applied strips or separate centre panel
- Recess / back
- 4 mm recess on the front; flat back; 18 mm material remains beneath the recess
- Surround
- Your chosen width, the same on all four sides
- Inside corners
- 6 mm radius, or hand-finished square corners
- Finish
- Primed and sprayed front, back and edges in your chosen colour and sheen
- Use and care
- Interior use. Moisture resistant, not waterproof. Protect from standing water and seal any cuts or holes made after finishing.
Board sizes and manufacturer information
Our 22 mm catalogue lists 2440 × 1220 mm and 3050 × 1220 mm sheets. Your door is cut to the dimensions you specify; you are buying a finished door, not a whole sheet.
Finsa technical guide (PDF) ↗Size
Machined from one piece of 22 mm MDF with a 4 mm-deep recess. No applied strips or separate centre panel. Flat back.
£180/m² + VAT, measured across the whole door. Includes 22 mm MDF, CNC recess and spraying. A minimum £25 uplift over the equivalent slab door applies. Hinges and extras are added separately; square inside corners add £12 per door + VAT.